5-001 High Inlet Temperature Refrigerated Dryers
(50 Hz) D25IT-A to D170IT-A

Flow Rate: From 0.4 To 2.4 m3/min
Max. Working Pressure: 14.5 bar g

Description

• CAir cooled / R134a / 3 in 1 Low Pressure Drop Aluminium Heat Exchanger
• Integrated general purpose filter removing air particle up to 1 micron
• Integrated aftercooler to handle inlet temperature up to 93 °C
• Electronic Drain as Standard
• Advanced Full Feature Control Panel with history of 10 alarms
• IP42 electrical rating
• Operating Limitations
• Ambient : Min 2ºC / Max 50ºC Air inlet temperature : Max 93º C

5-002 Refrigerant Dryer D-IN'

Flow Rate: From 0.2 To 212.9 m3/min " Air Cooled "
Pressure: From 12 To 14 bar g

Flow Rate: From 65.8 To 380 m3/min " Water ooled "
Pressure: From 12 To 14 bar g

Small Refrigerated Dryers (50 Hz) D12IN-A to D480IN-A

Description

• Air cooled / R134a / 3 in 1 Low Pressure Drop Aluminium Heat Exchanger
• Hermetically sealed piston refrigerant compressor / High Efficiency Condenser
• Variable Speed Fan, controlled by the Dryer Controller
• Electronic Drain as Standard
• Advanced Full Feature Control Panel with history of 10 alarms and remote alarm contact
• IP42 electrical rating
• Operating Limitations:Ambient : Min 2ºC / Max 50ºC Air inlet temperature : Max 60º C

Medium Refrigerated Dryers (50 Hz) D600IN-A to D5400IN-A

Description

• Air cooled / R507a / 3 in 1 Low Pressure Drop Aluminium Heat Exchanger
• Stainless Steel Demister / High Efficiency Condenser
• Anti-freezing/energy saving function
• Electronic No Loss Drain (ENLD) as Standard
• Advanced Control Panel with dew point indication and remote ON/OFF (From D1300IN-A)
• History of latest 10 alarms (D600IN-A to D950IN-A) and 50 alarms (D1300IN-A to D5400IN-A)
• Operating Limitations:
  • Ambient : Min 2ºC / Max 50ºC (D600IN-A-D950IN-A) Air inlet temperature : Max 60º C
  • Ambient : Min 2ºC / Max 45ºC (D1300IN-A-D5400IN-A)

Large Refrigerated Dryers (50 Hz) D4620IN-A to D22800IN-W

Description

• Air or water cooled / R407c / High efficiency scroll compressors
• Air-to-air exchanger (pre-cooler / re-heater) / Evaporator and water separator
• Electronic No Loss Drain (ENLD) as Standard
• Cataphoresis water manifold treatment
• Advanced Control Panel with dew point indication and automatic restart
• History of latest 50 alarms / Automatic Restart / Digital input for remote on / off
• Operating Limitations:
  • Ambient : Min 2ºC / Max 46ºC Air inlet temperature : Max 65º C
  • Water temperature: Min 20°C 1 / Max 45°C (water coo led models

5-003 Cycling Dryer TMS

Flow Rate: From 0.36 To 88 m3/min
Pressure: From 2 To 16 bar g

Thermal Mass™ Cycling Refrigerated Dryers (TMS 4 to TMS 38)

Description

• Air cooled / R134a / Hermetically sealed piston refrigerant compressor
• Thermal MassTM evaporator / Pre cooler and reheater (TMS 20 to TMS38)
• Integral float drain (TMS4 to TMS31) / ENLD (TMS38)
• Cyclone water separator included (loose:TMS4-TMS14)(Internally mounted:TMS20-TMS38)
• Instrumentation: Power on light / main switch
• Overheating & Current protection: Klixon thermal refrigeration compressor protection
• Operating Limitations:
  • Ambient : Min 0ºC / Max 43ºC Air inlet temperature : Max 55º C

5-004 Modular Dryer D-IM

Flow Rate: From 5 To 299 m3/hr
Max. Pressure: From 12 To 16 bar

Modular Desiccant Dryers (D5IM to D299IM)

Description

• Air Quality to -40ºC ISO 8573 Class 2 dew point performance
• Optional ISO 8573 Class 1 dew point performance available
• Filtration Provided as Standard (Filters Shipped Loose on models D41IM and above)
• Electronic Control Panel:D5IM-D34IM Easy to Read User Interface/D41IM-D299IM Interface with Functionality, which also shows tower pressure gauges.
• Low noise levels for point of use application
• Operating Limitations:
  • Ambient : Min 2ºC Air inlet temperature : Max 50º C

5-005 Desiccant Dryer D-IL and D-IB

Heatless Desiccant Dryers (D160IL to D3300IL)

Flow Rate: From 160 To 3,300 m3/hr
Pressure: From 7 To 10 bar

Description

• Inlet (High Efficiency) and outlet (General Purpose) heavy duty filters supplied with all dryers
• Control panel display: Tower status (drying & regeneration)/Operating & Purge Times/Operation Hours
• Alarms: High Dew Point (opt), fail to shift(opt), time of alarm, history of last 20 alarms
• Desiccant bed allows -40ºC (Std) and -70ºC (Optional) pressure dewpoint
• Energy Management System available as an option to reduce operating costs by measuring the outlet dewpoint and adjusting the cycle time accordingly to save energy
• Operating Limitations:
  • Ambient : Min 1ºC / Max 50ºC Air inlet temperature : Max 50º C

Heated Blower Desiccant Dryers (D500IB to D14900IB)

Flow Rate: From 500 To 14,900 m3/hr
Pressure: From 7 To 10 bar

Description

• Inlet (High Efficiency) and outlet (General Purpose) heavy duty filters supplied with all dryers
• Control panel display: Tower status (drying & regeneration)/Operating & Purge Times/Operation Hours
• Alarm: High Dew Point, time of alarm, history of last 20 alarms, High Outlet Temperature, Blower failure
• Energy Management System available as std feature to reduce operating costs by measuring the outlet dewpoint and adjusting the cycle time accordingly to save energy
• Operating Limitations:
  • Ambient : Min 1ºC / Max 50ºC Air inlet temperature : Max 50º C
  • Minimum capacity = 23% of dryer maximum capacity at reference conditions

5-006 AirFiltration

Flow Rate: From 0.58 To 520 m3/min
Pressure: 7 bar g

General Purpose Protection Filters - BSPT Connection

Description

• Air quality to ISO 8573.1:2001 / Class 3 Solid particulate / Class 3 oil Image to fit inside this size of box - Particle removal down to 1 micron All images to have the new logo - Maximum remaining oil aerosol content 0.6 mg/m3 content @ 21 C
• Operating Limitations:
  • Maximum operating pressure 17 bar (g)
  • Maximum operating temperature 80 C
  • Minimum operating temperature 1 C
  • Compliance with PED 97/23/EC and CE

High Efficiency Filters - BSPT Connection

Description

• Air quality to ISO 8573.1:2001 / Class 2 Solid particulate / Class 2 oil Image to fit inside this size of box - Particle removal down to 0.01 micron All images to have the new logo - Maximum remaining oil aerosol content 0.01 mg/m3 content @ 21 C
• Operating Limitations:
  • Maximum operating pressure 17 bar (g)
  • Maximum operating temperature 80 C
  • Minimum operating temperature 1 C
  • Compliance with PED 97/23/EC and CE
  • Note: Precede H filters with equivalent model G filters

Dust Filters - BSPT Connection

Description

• Air quality to ISO 8573.1:2001 / Class 3 Solid particulate Image to fit inside this size of box - Particle removal down to 1 micron All images to have the new logo
• Operating Limitations:
  • Maximum operating pressure 17 bar (g)
  • Maximum operating temperature 80 C
  • Minimum operating temperature 1 C
  • Compliance with PED 97/23/EC and CE

Activated Charcoal Filters - BSPT Connection

Description

• Air quality to ISO 8573.1:2001 / Class 1 oil Image to fit inside this size of box - Oil vapour and odour removal All images to have the new logo - Maximum remaining oil vapour content <0.003 mg/m³ content @ 21 C
• Operating Limitations:
  • Maximum operating pressure 17 bar (g)
  • Maximum operating temperature 30 C
  • Minimum operating temperature 1 C
  • Compliance with PED 97/23/EC and CE

General Purpose Protection Filters - Flanges Connection

Description

• Air quality to ISO 8573.1:2001 / Class 3 Solid particulate / Class 3 oil
• Particle removal down to 1 micron
• Maximum remaining oil aerosol content 0.6 mg/m3 content @ 21 C
• Operating Limitations:
  • Maximum operating pressure 16 bar (g)
  • Maximum operating temperature 80 C
  • Minimum operating temperature 1 C
  • Compliance with PED 97/23/EC and CE

High Efficiency Filters - Flanges Connection

Description

• Air quality to ISO 8573.1:2001 / Class 2 Solid particulate / Class 2 oil
• Particle removal down to 0.01 micron
• Maximum remaining oil aerosol content 0.01 mg/m3 content @ 21 C
• Operating Limitations:
  • Maximum operating pressure 16 bar (g)
  • Maximum operating temperature 80 C
  • Minimum operating temperature 1 C
  • Compliance with PED 97/23/EC and CE

Dust Filters - Flanges Connection

Description

• Air quality to ISO 8573.1:2001 / Class 3 Solid particulate
• Particle removal down to 1 micron
• Operating Limitations
• Maximum operating pressure 16 bar (g)
• Maximum operating temperature 80 C
• Minimum operating temperature 1 C
• Compliance with PED 97/23/EC and CE

Activated Charcoal Filters - Flanges Connection

Description

• Air quality to ISO 8573.1:2001 / Class 1 oil
• Oil vapour and odour removal
• Maximum remaining oil vapour content <0.003 mg/m³ content @ 21 C
• Operating Limitations
• Maximum operating pressure 16 bar (g)
• Maximum operating temperature 30 C
• Minimum operating temperature 1 C
• Compliance with PED 97/23/EC and CE

5-007 Aftercoolers AC and WC

Flow Rate : From 0.6 To 75 m3/min " Air Cooled "
Pressure : From 9 To 16 bar g

Flow Rate : From 1.2 To 550 m3/min " Water ooled "
Pressure : From 10 To 16 bar g

Electric Air cooled Aftercoolers (ABC-6 to ABC-750)

Description

• Air cooled / Electric fan motor / Copper tubes aluminium fins
• High efficiency water separator with threaded connection / Automatic float drain / Support legs / Mounted thermometer (ABC180-ABC750)
• 50 Hz and 60 Hz models available for all models
• Electrical protection: IP44 (ABC6 to ABC12 and ABC25A to ABC35A) / IP54 (ABC25 to ABC360) / IP55 (ABC400 to ABC750)
• Operating Limitations:
  • Ambient : Min 2ºC Air inlet temperature : Max 150º C

Pneumatic Air cooled Aftercoolers (ABC-35P to ABC-750P)

Description

• Air cooled / Pneumatic motor drive / Copper tubes aluminium fins
• High efficiency water separator with threaded connection / Automatic float drain / Support legs / Mounted thermometer (ABC180-ABC750)
• 50 Hz and 60 Hz models available for all models
• Electrical protection: IP44 (ABC6 to ABC12 and ABC25A to ABC35A) / IP54 (ABC25 to ABC360) / IP55 (ABC400 to ABC750)
• Operating Limitations:
  • Ambient : Min 2ºC Air inlet temperature : Max 150º C

Water Cooled Aftercoolers-Fixed Tube Bundle (WBC-12 to WBC-900)

Description

• Water cooled with fixed cooling tubes / Shell and tube Heat exchanger
• Treated carbon steel vessel, copper tubes, aluminium baffles / High efficiency water separator
• Automatic float drain/Mounted thermometer & Counter flanges (from WBC 180)
• FH/V = Fixed cooler Horizontal or vertical and FH = Fixed cooler Horizontal only
• WBC-12 FH/V to 135 FH/V: factory assembled as horizontal versions, but include a separator connection elbow kit to convert to a vertical version as std
• Operating Limitations:
  • Ambient : Min 2ºC Air inlet temperature : Max 200º C
  • Inlet water temperature: Max 90ºC

Water Cooled Aftercooler - Removable Tube Bundle (WBC-30 to WBC-5500)

Description

• Water cooled with removable cooling tubes / Shell and tube Heat exchanger
• Treated carbon steel vessel, copper tubes, aluminium baffles / High efficiency water separator
• Automatic float drain/Mounted thermometer & Counter flanges (from WBC 220)
• RH/V=Removable cooler horizontal or vertical&RH=Removable cooler Horizontal only
• WBC-30 RH/V to 135 RH/V: factory assembled as horizontal versions, but include a separator connection elbow kit to convert to a vertical version as std
• Operating Limitations:
  • Ambient : Min 2ºC Air inlet temperature : Max 200º C
  • Inlet water temperature: Max 90ºC